TB GUI nach Werk-Reset nicht zugänglich
Verfasst: Do 29. Nov 2018, 18:09
Hallo,
nach einem Reset auf die Werkseinstellungen lief der Initialisierungsprozess wie im Handbuch beschrieben auch problemlos ab. Auch das Zertifikat wurde in Firefox installiert.
Leider mokiert sich Bitdefender danach über jede Webseite, die ich aufrufen möchte, da kein vertrauenswürdiges Sicherheitszertifkat vorliege. Ich nehme an, dass zur Abhilfe noch das TB-Zertifikat dem PC (Win10) bekannt gegeben werden muss. Nur leider ist die Trutzbox über das GUI nicht erreichbar: Beim Aufruf mit https://trutzbox gibt es einen Seiten-Ladefehler, bei Eingabe von 192.168.178.20, das ist die von der Fritzbox vergebene IP, kommt als Fehlermeldung Error: connect EHOSTUNREACH 192.168.178.20:80. Über webmin (https://trutzbox:10000/session_login.cgi) kann ich die Systemeinstellungen der TB erreichen. Dort habe ich gesehen, dass für 69 Pakete Updates vorhanden sind. Allerdings schlägt der Updateprozess selbst mit dieser Fehlermeldung fehl:
Ein Reboot der TB hat an der Situation leider nichts geändert. Wie kann ich das GUI wieder zum Funktionieren bringen? Oder, als temporäre Alternative, wie kann man das TB_Zertifikat über webmin herunterladen?
Nachtrag: Ich habe das Zertifikat jetzt aus Firefox exportiert und in die Windows-Zertifikatsverwaltung importiert. Das hat soweit geklappt, dass jetzt wenigstens die Internetseiten ohne die nervigen Kommentare vom Bitdefender zugägnlich sind.
nach einem Reset auf die Werkseinstellungen lief der Initialisierungsprozess wie im Handbuch beschrieben auch problemlos ab. Auch das Zertifikat wurde in Firefox installiert.
Leider mokiert sich Bitdefender danach über jede Webseite, die ich aufrufen möchte, da kein vertrauenswürdiges Sicherheitszertifkat vorliege. Ich nehme an, dass zur Abhilfe noch das TB-Zertifikat dem PC (Win10) bekannt gegeben werden muss. Nur leider ist die Trutzbox über das GUI nicht erreichbar: Beim Aufruf mit https://trutzbox gibt es einen Seiten-Ladefehler, bei Eingabe von 192.168.178.20, das ist die von der Fritzbox vergebene IP, kommt als Fehlermeldung Error: connect EHOSTUNREACH 192.168.178.20:80. Über webmin (https://trutzbox:10000/session_login.cgi) kann ich die Systemeinstellungen der TB erreichen. Dort habe ich gesehen, dass für 69 Pakete Updates vorhanden sind. Allerdings schlägt der Updateprozess selbst mit dieser Fehlermeldung fehl:
Code: Alles auswählen
Update jetzt apache2 apache2-bin apache2-data apache2-mpm-prefork bind9-host certbot comidio-trutzbox-node dnsutils dovecot-core dovecot-imapd dovecot-lmtpd dovecot-sqlite firmware-amd-graphics firmware-linux-nonfree firmware-misc-nonfree gcc-4.9-base jicofo jitsi-videobridge libapache2-mod-php5 libbind9-90 libdns100 libgcc1 libgnutls-deb0-28 libgnutls-openssl27 libgssapi-krb5-2 libhogweed2 libisc95 libisccfg90 libkrb5-3 libkrb5support0 liblwres90 libncurses5 libncursesw5 libnettle4 libpython2.7 libpython2.7-minimal libpython2.7-stdlib libstdc++6 libtinfo5 libwbclient0 openssh-client openssh-server openssh-sftp-server perl perl-base perl-modules php-pear php5 php5-cli php5-common php5-gd php5-intl php5-mcrypt php5-pspell php5-sqlite python-acme python-certbot python-samba python2.7 python2.7-minimal samba samba-common samba-common-bin samba-dsdb-modules samba-libs ssh trutzbox-base-routing trutzrtc winbind ..
Installiere Paket(e) mit Befehl apt-get -y install apache2 apache2-bin apache2-data apache2-mpm-prefork bind9-host certbot comidio-trutzbox-node dnsutils dovecot-core dovecot-imapd dovecot-lmtpd dovecot-sqlite firmware-amd-graphics firmware-linux-nonfree firmware-misc-nonfree gcc-4.9-base jicofo jitsi-videobridge libapache2-mod-php5 libbind9-90 libdns100 libgcc1 libgnutls-deb0-28 libgnutls-openssl27 libgssapi-krb5-2 libhogweed2 libisc95 libisccfg90 libkrb5-3 libkrb5support0 liblwres90 libncurses5 libncursesw5 libnettle4 libpython2.7 libpython2.7-minimal libpython2.7-stdlib libstdc++6 libtinfo5 libwbclient0 openssh-client openssh-server openssh-sftp-server perl perl-base perl-modules php-pear php5 php5-cli php5-common php5-gd php5-intl php5-mcrypt php5-pspell php5-sqlite python-acme python-certbot python-samba python2.7 python2.7-minimal samba samba-common samba-common-bin samba-dsdb-modules samba-libs ssh trutzbox-base-routing trutzrtc winbind ..
Setting up trutzbox-master (0.9.6.115) ...
Making backup of file [/etc/rc.local] into directory [/var/lib/comidio/trutzbox/backup/trutzbox-master_20181129-174503/etc]
Replacing file [/etc/rc.local] with version from package [trutzbox-master]
Making backup of file [/etc/apt/apt.conf.d/50unattended-upgrades] into directory [/var/lib/comidio/trutzbox/backup/trutzbox-master_20181129-174503/etc/apt/apt.conf.d]
Replacing file [/etc/apt/apt.conf.d/50unattended-upgrades] with version from package [trutzbox-master]
Making backup of file [/etc/logrotate.conf] into directory [/var/lib/comidio/trutzbox/backup/trutzbox-master_20181129-174503/etc]
Replacing file [/etc/logrotate.conf] with version from package [trutzbox-master]
apache2_invoke proxy: already enabled
Restarting web server: apache2(98)Address already in use: AH00072: make_sock: could not bind to address [::]:9082
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:9082
no listening sockets available, shutting down
AH00015: Unable to open logs
Action 'start' failed.
The Apache error log may have more information.
failed!
invoke-rc.d: initscript apache2, action "restart" failed.
apache2_invoke proxy_http: already enabled
Restarting web server: apache2(98)Address already in use: AH00072: make_sock: could not bind to address [::]:9082
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:9082
no listening sockets available, shutting down
AH00015: Unable to open logs
Action 'start' failed.
The Apache error log may have more information.
failed!
invoke-rc.d: initscript apache2, action "restart" failed.
apache2_invoke rewrite: already enabled
Restarting web server: apache2(98)Address already in use: AH00072: make_sock: could not bind to address [::]:9082
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:9082
no listening sockets available, shutting down
AH00015: Unable to open logs
Action 'start' failed.
The Apache error log may have more information.
failed!
invoke-rc.d: initscript apache2, action "restart" failed.
apache2_invoke proxy_wstunnel: already enabled
Restarting web server: apache2(98)Address already in use: AH00072: make_sock: could not bind to address [::]:9082
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:9082
no listening sockets available, shutting down
AH00015: Unable to open logs
Action 'start' failed.
The Apache error log may have more information.
failed!
invoke-rc.d: initscript apache2, action "restart" failed.
apache2_invoke ssl: already enabled
Restarting web server: apache2(98)Address already in use: AH00072: make_sock: could not bind to address [::]:9082
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:9082
no listening sockets available, shutting down
AH00015: Unable to open logs
Action 'start' failed.
The Apache error log may have more information.
failed!
invoke-rc.d: initscript apache2, action "restart" failed.
apache2_invoke trutzbox postinst: No action required
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
apache2_invoke trutzbox: already enabled
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
apache2_invoke default postinst: No action required
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
apache2_invoke 000-default postinst: No action required
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
apache2_invoke trutzbox-extern: already enabled
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
apache2_invoke trutzbox-tls: already enabled
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
apache2_invoke trutzbox-redirect: already enabled
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
Reloading web server: apache2 failed!
Apache2 is not running ... (warning).
invoke-rc.d: initscript apache2, action "reload" failed.
dpkg: error processing package trutzbox-master (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
trutzbox-master
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgnutls-openssl27 : Depends: libgnutls-deb0-28 (= 3.3.8-6+deb8u7) but 3.3.30-0+deb8u1 is to be installed
E: Unable to correct problems, you have held broken packages.
.. Installation fehlgeschlagen!
Nachtrag: Ich habe das Zertifikat jetzt aus Firefox exportiert und in die Windows-Zertifikatsverwaltung importiert. Das hat soweit geklappt, dass jetzt wenigstens die Internetseiten ohne die nervigen Kommentare vom Bitdefender zugägnlich sind.